DWS represents Georg Fischer +GF+ pipe tools for stainless steel applications. +GF+ tools provide precision square cold cuts required for quality fit-up used in orbital welding.
|
Standard RA Series
High-Performance Material
|
The saw blades are small, inexpensive and available in different versions for different materials and wall thicknesses. By using various bevel cutters, pipe ends can be prepared for welding. The pipe cutters are very simple to operate: simply clamp a pipe of the desired length in the self-centering vise, then rotate the machine head containing the saw blade once around the pipe. For cutting and beveling stainless steel pipes, special saw blades and bevel cutters are available. The motor is equipped with a speed regulating device to adapt the speed of rotation to allow stainless steel pipe to be cut and beveled satisfactorily, while considerably improving tool life. The type RA pipe cutting and beveling machines are amazingly versatile. By fitting the appropriate cutter, they can be easily adapted for special jobs such as cutting and beveling simultaneously, beveling and facing off, or groove cutting and dismantling. The drive is adaptable: all pipe cutters are fitted as a standard with a 100-120 V, 50/60 Hz single-phase AC motor, but can be supplied with an air motor or motors with special voltage. Models are now available with gear-reduction drives for slower saw speed operations on hard and difficult-to-cut materials such as stainless, hastalloy, titanium, etc. |
All products are available for purchase/lease or on a weekly or monthly rental basis.
